This is a NEW Supermicro Super X8DTU-F UIO Xeon Quad/Dual-Core Tylersburg ServerBoard. 3 Year Warranty Included.
This Supermicro Super X8DTU-F UIO Xeon Quad/Dual-Core Tylersburg/Nehalem ServerBoard is ideal for those who desire fast, powerful and highly customizable systems. This server board's UIO/Universal I/O technology allows users to
select from a wide range of I/O options to provide the ultimate
flexibility in storage and networking. When a Supermicro
UIO card is installed in a UIO slot, it becomes a part of the
serverboard, while still allowing the server to retain all of its
PCI-Express and PCI-X slots for expansion cards.
Without a Supermicro UIO card installed, the server board functions
as a complete and optimized server board. Installing a UIO card
provides easy and cost effective upgrades for:
- SAS/SATA RAID 5 & 6
- 4-Port 1 Gbit Ethernet
- 2-Port 10 Gbit Ethernet
- Infiniband
Future upgrades are easy – just replace the Supermicro UIO
card with any one of the multiple expansion cards available.
Supermicro UIO cards minimize the complexity of your
server configurations, provide cost advantages over standard
expansion cards, and protect your server board investment. For information on our available SuperMicro UIO Cards please vist our UIO Card Product Page
If you would like more information on the product: please contact our sales department by sending an email to sales@berkcom.com or by calling us at (877) BERKCOM.
Specifications:
| Physical Stats |
Form Factor |
- Proprietary
| Dimensions |
- 12.075" x 13.05" (30.67cm x 33.15cm)
| |
| Processor/Cache |
CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type: Quad-Core Intel Xeon®Processor 5500 sequence (Nehalem-EP processor)
| QPI | | |
| System Memory |
Memory Capacity |
- 12x 240-pin DIMM sockets
- Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
- Memory Mirroring supported
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes |
- 1GB, 2GB, 4GB, 8GB
| Memory Voltage |
- 1.5 V
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | | | |
| On-Board Devices |
Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
| Network Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| Graphics | | | | | |
| Input / Output |
Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
| LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| USB |
- 2x USB rear ports
- 2x USB on-board
- 4x USB internal headers
- Total 8 USB 2.0 Compliant
| VGA |
- 1x VGA Port
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
| | | | | |
| Chassis ( Optimized for X8DTU-F ) |
1U Chassis |
- CSE-111T-560UB
- CSE-113TQ-700UB
- CSE-113TQ-R650UB
- CSE-812L-280U
- CSE-812L-520U
| 2U Chassis |
- CSE-823MTQ-R700U
- CSE-825MTQ-R700UB
- CSE-825TQ-560U
- CSE-825TQ-R700UV
- CSE-826E1-R800UB
- CSE-826E2-R800UB
- CSE-826TQ-R800UB
| Important Chassis Notes |
- To ensure system stability, a 550W (minimum) ATX power supply
[Two 8-pin (+12V) and 24-pin are required]
| | |
| Expansion Slots |
PCI-Express / PCI-X / UIO |
- Left Side 1 (x16) PCI-E 2.0 + 1 UIO slots or
- 1 (x16) PCI-E 2.0
- Right Side 2 LAN optional
- For 2U configuration, Please go to UIO Riser Cards page
|
| System BIOS |
BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
| |
| Management |
Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- Super Doctor III
| Power Configurations |
- ACPI / ACPM Power Management
| |
| PC Health Monitoring |
CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
| FAN |
- Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
| | | |
| Operating Environment / Compliance RoHS |
RoHS 6/6 |
- RoHS Compliant 6/6, Pb Free
| Environmental Spec |
- Operating Temperature: 10° to 35° C (50° to 95°F)
- Non-operating Temperature: -40° to 70° C (-40° to 158° F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |
We offer the following compatible systems:
X8DTU-F
