This is a NEW Supermicro Super PDSMU UIO Single CPU Dual-core Intel 3010 (Mukilteo-2P) chipset MainBoard / ServerBoard. Offer includes a 3 Year Warranty.
This Supermicro Super PDSMU UIO Single CPU Dual-core Intel 3010 (Mukilteo-2P) chipset MainBoard / ServerBoard's UIO/Universal I/O technology allows users to
select from a wide range of I/O options to provide the ultimate
flexibility in storage and networking. When a Supermicro
UIO card is installed in a UIO slot, it becomes a part of the
serverboard, while still allowing the server to retain all of its
PCI-Express and PCI-X slots for expansion cards.
Without a Supermicro UIO card installed, the server board functions
as a complete and optimized server board. Installing a UIO card
provides easy and cost effective upgrades for:
- SAS/SATA RAID 5 & 6
- 4-Port 1 Gbit Ethernet
- 2-Port 10 Gbit Ethernet
- Infiniband
Future upgrades are easy – just replace the Supermicro UIO
card with any one of the multiple expansion cards available.
Supermicro UIO cards minimize the complexity of your
server configurations, provide cost advantages over standard
expansion cards, and protect your server board investment. For information on our available SuperMicro UIO Cards please vist our UIO Card Product Page
If you would like more information on the product: please contact our sales department by sending an email to sales@berkcom.com or by calling us at (877) BERKCOM.
Specifications:
| Physical Stats |
Form Factor |
- Proprietary
| Dimensions |
- 8" x 13 ", (33.02cm x 20.32 cm)
| |
| Processor/Cache |
CPU |
- Single LGA775 ZIF Socket
- Supports a Quad-Core Intel? Xeon? 3200 series processor
- Supports a Dual-Core Intel? Xeon? 3000 series processor
- Supports a Quad-Core Intel? Core?2 Extreme series processor
- Supports an Intel? Core?2 Quad series processor
- Supports an Intel? Core?2 Duo series processor
- Supports an Intel? Pentium? processor E2000 series
- Supports a Dual-Core Intel? Pentium? D processor
- Supports an Intel? Pentium? Extreme Edition processor
- Supports an Intel? Pentium? 4 processor
- Supports an Intel? Celeron? processor E1000 series
- Supports an Intel? Celeron? processor 400 series
- NOTE: This board DOES NOT support Q9000, E8000, E7000 or E5000 series processor
| | System Bus |
- 1066 / 800 / 533 MHz system bus
|
| System Memory |
Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Single / Dual Channel)
| Memory Type |
- DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
| Memory Voltage | | | | |
| On-Board Devices |
Chipset |
- Intel 3010 (Mukilteo-2P) chipset
- ICH7R + PXH + Intel? 82573V + Intel? 82573L
| Serial ATA |
- Intel? ICH7R SATA2 (3 Gbps) controller built-in
- Intel:
RAID 0, 1, 5, 10 support (Windows Only)
- Adaptec:
RAID 0 (Two, three, four drives only)
RAID 1 (Two hard drives only)
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO+)
- NOTE: Must use dedicated LAN for IPMI function
| Network Controllers |
- 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel? 82573V + Intel? 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
| VGA |
- On-board ATI ES1000 (16MB) graphics
| Super I/O |
- Winbond 83627HG chip
| Clock Generator | | | | | | | |
| Input / Output |
Serial ATA |
- Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy |
- 1 Floppy controller; 1.44 MB
| LAN |
- 2x RJ45 LAN ports
| USB |
- Up to 6x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 2 internal header for 4 USB 2.0/1.1 ports
| VGA |
- 1x VGA Port
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
| Serial Port / Header |
- 1x Fast UART 16550 serial port
- 1x internal header
| | | | | | | |
| Chassis |
1U Chassis |
- CSE-815TQ-R450U
- CSE-815TQ-560U
- CSE-812L-280U
| 2U Chassis |
- CSE-825TQ-R700U
| Important Chassis Notes |
- For a general system, a 420W (minimum) ATX12V power supply [8-pin +12V AND 24-pin is recommended to assure system stability].
| | |
| Expansion Slots |
Universal I/O |
- 1 Universal (UIO) slot
- Used in conjunction with Supermicro UIO Controller Card
| PCI-Express / PCI-X / UIO |
- 2 (x8) PCI-e slot
- 1 (x4) PCI-e slot
| |
| System BIOS |
BIOS Type |
- 8Mb Flash EEPROM with Phoenix BIOS
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- SMBIOS 2.3
- USB Keyboard support
| |
| Management |
Software |
- W83793G H/W Monitor
- Super Doctor III
- Watch Dog
- NMI
| Power Configurations |
- ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| |
| PC Health Monitoring |
CPU |
- Monitors for CPU Cores (+1.5V, +1.8V, +3.3V, +5, ?12V, +5V Standby, VBAT)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
| FAN |
- Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor (TM2) Support
- PECI
| LED |
- CPU / System Overheat LED
- Standby alert LED
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
| | | | |
| Operating Environment / Compliance RoHS |
RoHS 6/6 |
- RoHS Compliant 6/6, Pb Free
| Environmental Spec |
- Operating Temperature: 10?to 35?C (50?to 95?F)
- Non-operating Temperature: -40?to 70?C (-40?to 158?F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |
If you would like more information on the product: please contact our sales department by sending an email to sales@berkcom.com or by calling us at (877) BERKCOM.
PDSMU
